Kenwood DPX308U, Quick Start Manual

Page: 25 / 59

English
|
9
Function setting Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button.
Function items vary from source to source.
2
Enter Function setting mode
Press the [VOL] knob.
3
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
Operation example:
[VOL] [ ]
[VOL] [ ]
Settings
Seek Mode
Auto Memory
…
Audio Control
…
1 1
2
4
3
1 3
2 4
1 sec.
Exit
In this manual, the above selection is indicated as
Select “SETTINGS”
>
“SEEK MODE”.
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.