24
|
English
Function Set
In Standby mode
Dimmer Level Adjustment
You can adjust the Dimmer level of the unit when
your car's light switch has been turned on.
Display and Setting
"DIM STEP 1"
…
"DIM STEP 7" (Original setting)
…
"DIM STEP 13"
•
This function is available when the dimmer wire is
connected and the light switch of your car is turned
on.
In Standby mode
Opening Demonstration
Setting the Demonstration when Power is turned
ON.
Display
Setting
"Opening On"
Demonstration is carried out when Power is
turned ON.
"Opening Off"
Demonstration is not carried out when Power
is turned ON.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"BEEP On"
Beep is heard.
"BEEP Off"
Beep canceled.
In Standby mode
Equalizer mode
Setting the method of adjusting Equalizer types.
Display
Setting
"EQ mode EASY"
The effects of Equalizer type can be adjusted
among 3 levels.
"EQ mode PRO"
Equalizer types can be adjusted by Bass,
Middle, and Treble.
In Standby mode
Indirect Lighting
You can illuminate the area around the display
with soft indirect lighting.
Display
Setting
"Lighting On"
Turns indirect lighting on.
"Lighting Off"
Turns indirect lighting off.
In Standby mode
Switching preout
Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display
Setting
"SWPRE Rear"
Rear preout.
"SWPRE Sub-W"
Subwoofer preout.
1.DPX-MP5070̲US.indd
04.3.5, 9:52 AM
24
