12
|
English
General features
Adjustment of Equalizer type at PRO
Adjusting the effect of an Equalizer type selected
in 'Equalizer Control' when 'Equalizer mode' is
"PRO".
1
Refer to 'Equalizer Control' (page 11) to
select the Equalizer type.
2
Select the item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the item
Press the [
4
] or [
¢
] button.
Adjustment Item
Display
Range
Bass Center Frequency
"Bass Frq"
60/70/80/100 or 150 Hz
Bass level
"Bass LV"
–12 — +12
Bass Q Factor
"Bass Q"
1.00/1.25/1.50/2.00
Bass Extend
"Bass EXT"
ON/OFF
Middle Center Frequency "Mid Frq"
0.5/1.0/1.5/2.0 kHz
Middle level
"Mid LV"
–12 — +12
Middle Q Factor
"Mid Q"
1.0/2.0
Treble Center Frequency
"Tre Frq"
10.0/12.5/15.0/17.5 kHz
Treble level
"Tre LV"
–12 — +12
• According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the Bass Extend is set to ON, low frequency
response is extended by 20%.
4
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
Memory preset of adjustment of
Equalizer type
The 'Adjustment of Equalizer type at PRO' can be
preset.
1
Refer to 'Adjustment of Equalizer type at
PRO' (page 12) to adjust the Equalizer type.
2
Preset the adjusted value
Press the [1] — [3] button for at least 1
second.
Recalling a setting value
1
Enter the Equalizer Control mode
Press the [EQ] button.
"EQ mode PRO" is displayed.
• If "EQ mode EASY" is displayed, refer to 'Equalizer
mode' (page 24) to set the mode to "EQ mode PRO".
2
Recall the setting value
Press the [1] — [3] button.
Spectrum Analyzer Select
Selecting the Spectrum Analyzer display.
1
Enter the Spectrum Analyzer Select mode
Press the [S.A] button.
"Speana mode" is displayed.
2
Select the Spectrum Analyzer
Press the [S.A] button.
Each time the button is pressed, the Spectrum
Analyzers switch as shown below:
Spectrum Analyzer
Display
Scan of Spectrum Analyzer
"Speana Scan"
Just Fit
"Just Fit"
Peak Hold
"Peak Hold"
Mirage
"Mirage"
Albatross
"Albatross"
Wave Splash
"Wave Splash"
Seesaw
"Seesaw"
Riff Laugh
"Riff Laugh"
Zigzag
"Zigzag"
Sprout
"Sprout"
Rain Drop
"Rain Drop"
Spectrum Analyzer Off
"Speana Off"
1.DPX-MP5070̲US.indd
04.3.5, 9:52 AM
12
