English
|
13
Station Preset Memory
Putting a station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [
4
] or [
¢
].
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least 2
seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory
on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select the Auto Memory Entry mode
Push the Control knob towards [FM] or [AM].
Select the "A-Memory" display.
4
Open Auto Memory Entry
Hold down on right or left of the Control knob
for at least 2 seconds.
When 6 stations that can be received are put in the
memory, Auto Memory Entry closes.
Preset Tuning
Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Recall the station
Press the desired [1] — [6] button.
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1
Turn the power OFF
Press the [SRC] button for at least 1 second.
2
Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
⁄
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
B64-3609-00̲English̲r5.indd Sec1:13
B64-3609-00̲English̲r5.indd Sec1:13
06.12.6 3:00:40 PM
06.12.6 3:00:40 PM
