8
|
DPX-MP5110U/DPX-MP4110/DPX-MP3110
General Operation
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
Display
OFF
“SP Off”
For 5 & 4 in. speaker
“SP 5/4”
For 6 & 6x9 in. speaker
“SP 6*9/6”
For the OEM speaker
“SP OEM”
1
Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2
Enter Speaker Setting mode
Press the Control knob.
“SP SEL” is displayed.
3
Select the Speaker type
Turn the Control knob.
4
Exit Speaker Setting mode
Press the Control knob.
Sound Enhancer Select
You can play back adding gorgeous heavy bass to
the sound.
1
Enter the Sound Effect mode
Press the [SE] button.
"SE SEL" is displayed.
2
Select the Sound effect item
Turn the Control knob.
Sound effect
Display
Returns to the normal sound without Sound effect.
“SE Off“
Moves the sound image up a notch and adjusts bass
.
“SE Low”
Moves the sound image up two notches and adjusts
bass.
“SE High“
Changes to the value set in <Sound Enhancer
Control>(page 9).
“SE User“
When the Sound effect is ON, the
“
SE
“
indicator is
ON.
3
Exit the Sound Effect mode
Press the [SE] button.
Audio Setup
You can set Sound system, such as follows;
Adjustment Item
Display
Range
Front High Pass Filter
“HPF”
Through/40/60/80/100/120/
150/180/220 Hz
Rear High Pass Filter
“HPR”
Through/40/60/80/100/120/
150/180/220 Hz
Low Pass Filter
“LPF”
50/60/80/100/120/Through Hz
Subwoofer Phase
“PHAS”
Reverse (180°)/ Normal (0°)
Volume offset
“V-Off”
–8 — ±0 (AUX: -8— +8)
Loudness
“LOUD”
Off/On
Dual Zone System
“2ZON”
Off/On
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “Zone2” of <Menu
System> (page 14).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 7).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the Control knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the Control knob.
4
Adjust the Audio setup item
Turn the Control knob.
5
Exit Audio Setup mode
Press the Control knob for at least 1 second.
B64-4186-00̲00̲English.indd 8
B64-4186-00̲00̲English.indd 8
08.2.5 1:09:27 PM
08.2.5 1:09:27 PM
