English
|
7
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the Bass
level, Middle level, and Treble level in detail.
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 6).
2
Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item
Display
Range
Bass Center Frequency
"BAS F"
40/50/60/70/80/100/
120/150 Hz
Bass Q Factor
"BAS Q"
1.00/1.25/1.50/2.00
Bass Extend
"B EX"
OFF/ON
Middle level
Adjustment Item
Display
Range
Middle Center Frequency "MID F"
0.5/1.0/1.5/2.0 kHz
Middle Q Factor
"MID Q"
1.0/2.0
Treble level
Adjustment Item
Display
Range
Treble Center Frequency
"TRE"
10.0/12.5/15.0/17.5 kHz
5
Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [VOL] and [ATT] buttons.
Audio Setup
Setting the Sound system, such as Cross over
Network.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Setup the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Front High Pass Filter
"HPF"
Through/40/60/80/100/120/
150/180/220 Hz
Rear High Pass Filter
"HPR"
Through/40/60/80/100/120/
150/180/220 Hz
Low Pass Filter
"LPF"
50/60/80/100/120/Through Hz
Subwoofer Phase
"PHAS"
Reverse (180°)/ Normal (0°)
Volume offset
"V-OFF"
–8 — ±0 (AUX: -8— +8)
Loudness
"LOUD"
OFF/ON
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones
during low volume. (Only the low tone is
compensated for when the tuner is selected
as a source.)
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
B64-3612-00̲00̲M̲English.Indd 7
B64-3612-00̲00̲M̲English.Indd 7
06.12.22 1:32:01 PM
06.12.22 1:32:01 PM
