DPF-K6010V
No.
Name
I/O
Description
1, 2
VSS
–
Ground.
3
NC
–
No used.
4, 5
VCC
–
Voltage supply, 5V.
6
DISC C
I
Clock for programming to access internal registers.
7
AUX0 (CLOCK)
O
Outputs serial data transfer clock to IC2 (D.S.P).
8
DSC D0
I/O
Data for programming to access internal registers.
9
AUX1 (FOK)
O
Focus OK output. Used for SENS output and servo auto sequencer.
10
DISC S
I
Strobe for programming to access internal registers.
11
AUX2 (RMR)
O
Loading motor forward direction output.
12
DCLK/EXT CLK
O
Dual-purpose pin. DCLK is the MPEG decoder clock.
I
EXT CLK is the external clock. EXT CLK input during bypass PLL mode.
13
RST
I
Video reset (active low).
14
AUX7 (RML)
O
Loading motor reverse direction output.
15
MUTE
O
No used.
16
VCC
–
Voltage supply, 5V.
17
MCLK
–
No used.
18
AUX8 (LMR)
O
Load motor opposite direction (taking out) output.
19
TWS/SPLL OUT
–
No used.
20
AUX9 (LMF)
O
Load motor positive direction (dragging) output.
21, 22
TSD/TBCK
–
No used.
O
Dual purpose pin. RWS is the receive audio frame sync.
Pins SEL PLL [1 : 0] select the PLL clock frequency for DCLK output.
SEL PLL1
SEL PLL0
DCLK
23
RWS/SEL PLL1
I
0
0
Bypass PLL (Input Mode)
0
1
27MHz (Output Mode)
1
0
32.4MHz (Output Mode)
1
1
40.5MHz (Output Mode)
24
RST OUT
O
Reset output (active low).
25~31
VSS
–
Ground.
32
VCC
–
Voltage supply, 5V.
33
RSD/SEL PLL0
O
Dual purpose pin. RSD is the receive audio data input.
I
SEL PLL0 is the select PLL. See the table for pin no. 23.
34
AUX10 (LDON)
O
Laser ON/OFF control.
35
AUX11 (BRKM)
O
Rotary motor deceleration output.
36
AUX12 (A18)
O
Address output to IC14 (4M DRAM).
O
Dual purpose pin. RBCK is the receive audio bit clock.
37
RBCK/SER IN
SER IN is serial input DSC mode.
I
0 = Parallel DSC mode.
1 = Serial DSC mode.
38
AUX13 (166L)
O
IC17 (TC74HC166AF), Shift/Load.
39
AUX14 (166CK)
O
IC17 (TC74HC166AF), clock.
40
AUX15 (R MUTE)
O
Digital mute control terminal.
41
VSSA
–
Analog ground.
42
VREF M
I
DAC and ADC minimum reference. Bypass to VCMR with 10uF in parallel with 0.1uF.
43
VREF P
I
DAC and ADC minimum reference. Bypass to VCMR with 10uF in parallel with 0.1uF.
44, 45
VCCA
–
Analog VCC, 5V.
46, 47
AOR/AOL
–
No used.
2. VIDEO DAC : IC12 (ES3209F)
Pin description
6
CIRCUIT DESCRIPTION
DPF-K6010V(K)
COVER1,1(
98.12.10
10:54
y [ W 11
