Kenwood DNX7220, Instruction Manual

Page: 55 / 100

English 55
Setting Up the Hands Free Phone
The Hands Free system can be set as follows.
1 Display the Hands Free Setup screen
2 Setup each item
1
2
4
3
5
6
7
8
9
10
11
12
1
Moves to the "Hands Free Set Up 2" screen.
2
Sets an automatic response time after call
termination. ( "8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
3
Sets a ringing tone output position.
( "Front R")
"Front L": Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
4
Sets the beep of the incoming call.
( "On")
"On": Beep is heard.
"Off": Beep is canceled.
5
Sets the beep of the incoming SMS.
( "On")
"On": Beep is heard.
"Off": Beep is canceled.
6
Returns to the "Hands Free Control" screen.
7
Returns to the "Hands Free Set Up 1" screen.
8
Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
(
"On")
"On": Yes.
"Off": No.
9
Sets the SMS function. ( "On")
"On": Use SMS function.
"Off": SMS not available.
p
Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
57).
q
Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 58).
w
Returns to the Hands Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
DNX̲DDX7̲E.indb 55 DNX̲DDX7̲E.indb 55 08.1.31 1:26:42 PM 08.1.31 1:26:42 PM