60
60
61
Connecting the Bluetooth unit
1
Touch [SET] of [Paired Device List].
Connection Device List screen appears.
2
Touch the device name you want to
connect.
Means that the device is a cell-phone.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
3
Touch [TEL(HFP)].
[TEL(HFP)] is for cell-phone.
NOTE
• Touching [Remove] removes registration
information. After you touch the key, a
confirmation message appears. Follow the
message and complete the operation.
• To disconnect the device, perform above
procedures again.
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Downloading the phonebook
If you want to use your phonebook data, it
is necessary to download the data from the
cell-phone to this unit in advance.
1
Operate the cell-phone to send the
phonebook data to this unit.
2
Operate the cell-phone to start the
hands-free connection.
NOTE
• If your cell-phone supports auto-download of
phonebook but not downloaded automatically,
follow the procedure above to download
manually.
• See the instruction manual of your cell-phone for
the operation.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 32 digits can be registered for each
phone number along with up to 50 characters
representing a name. (50 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
Making a call
1
Press the <TEL> button.
Hands Free screen appears.
2
Select a dialing method.
See the following table for each method.
Call by entering a phone number
1
Touch [Direct Number].
2
Enter a phone number with number keys.
3
Touch [ ].
Call using call records
1
Touch [Incoming Calls], [Outgoing Calls], or
[Missed Calls].
2
Select the phone number from the list.
3
Touch [ ].
Redial
1
Touch [Redial] to display the previously
called number.
2
Touch [ ].
Call using the phonebook
1
Touch [Phonebook].
2
Select the name from the list.*
1
*
2
3
Select the number from the list.
4
Touch [ ].
Call using the preset number
1
Touch [Preset #] to start calling the
corresponding phone number.
Continued
Summary of Contents for DNX4210DAB
Page 56: ......
