Kenwood DNX4210DAB Instruction Manual Download

Page: 30 / 56

Return to the Top page

Bluetooth Operation

Return to the Top page

Bluetooth Operation

Using the Bluetooth function, various
functions can be used: making/receiving a
call.

About the cell-phone

This unit conforms to the following
Bluetooth specifications:

Version

Bluetooth Ver. 2.0 + EDR

Profile
Cell-phone:

HFP (Hands Free Profile)

NOTE

• For the cell-phones verified for compatibility,

access the following URL:

http://www.kenwood.com/cs/ce/bt/

• The units supporting the Bluetooth function have

been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.

Registering And Connecting Bluetooth Unit

It is necessary to register the cell-phone to
this unit before using the Bluetooth function.
You can register up to 5 Bluetooth unit.

Press the <TEL> button.

Hands Free screen appears.

luetooth Control

Touch [BT SETUP].

Bluetooth SETUP screen appears.
See the following section for each setting.

•

Registering the Bluetooth Unit

(P.59)

•

Connecting the Bluetooth unit

(P.60)

Registering the Bluetooth Unit

Touch [SET] of [Regist New Device].

Searched Device List screen appears.

NOTE

• A new device cannot be registered if there are 5

registered Bluetooth units. Delete unnecessary
registration. See

Connecting the Bluetooth unit

(P.60)

Touch [PIN Code Set].

PIN Code Set screen appears.

NOTE

• If the unit cannot be searched in step 1, you can

search the unit again by touching [Search] in
above screen.

• Touch [Cancel] to cancel searching for the

Bluetooth unit.

Enter PIN code and touch [Enter].

The entered code is recognized and
Searched Device List screen appears
again.

Select the Bluetooth unit to register
from the list.

The Connection Device List screen
appears.

NOTE

• Registering operation can be performed from the

Bluetooth unit. In this operation, entering the PIN
code is necessary. See

Registering Bluetooth

unit PIN code (P.64)

Summary of Contents for DNX4210DAB

























































Search results

Summary of Contents for DNX4210DAB

Reviews:

Related manuals for DNX4210DAB

Brands by name

Popular brands

Kenwood DNX4210DAB, Instruction Manual

Search results

Summary of Contents for DNX4210DAB

Reviews:

Related manuals for DNX4210DAB

Brands by name

Popular brands