Kenwood DNN9330BT, Instruction Manual

Page: 59 / 76

116 117
Return to the Top page
Setting Up
Return to the Top page
Setting Up
AV Input Setup
You can set AV input parameters.
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
iPod AV Interface Use*
1
Set the terminal which iPod is connected.
Setting values are iPod and AV-IN2.
iPod
(Default): You can listen to audio or watch
video in your iPod as iPod
source.
AV-IN2
: You can listen to audio in your iPod
as iPod source. You can also listen to
audio or watch video output from a AV
device as AV-IN2 source.
AV-IN1 Name / AV-IN2 Name*
2
Set a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is “VIDEO”.
*1 This item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [AV-IN2 Name] becomes settable when
“AV-IN2” is selected in [iPod AV Interface
Use].
AV Output Interface Setup
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [
C
] or [
D
] to set [AV-OUT] to
VIDEO, DISC, iPod, or OFF.