Kenwood DMX908S, Instruction Manual

Page: 83 / 106

Remote control
83
English
Remote control
This unit can be operated using the remote
control KCA-RCDV340 (optional accessory).
#
CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
• Risk of fire or explosion if the battery is
replaced by an incorrect type.
Ensure to replace only with the same type.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is left in
an extremely high temperature surrounding
environment and/or subjected extremely
low air pressure. The battery pack or batteries
shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is
disposed into fire or a hot oven, recharged,
shorted, mechanically crushed or cut of the
battery.
• If spilled fluid comes in contact with your eyes
or on clothing, immediately rinse with water
and consult a physician.
Battery Installation
If the remote control operates only over
shorter distances or does not operate at all, it
is possible that the batteries are depleted.
In such instances, replace the both batteries
with new ones.
1
Insert two “AAA”/“R03”-size batteries
with the and poles aligned properly,
following the illustration inside the case.
Functions of the Remote
control Buttons
Ñ
Switch the operation mode
The functions operated from the remote
control differ depending on the position of the
mode switch.
V.SEL
R.VOL
MENU
ENTER
MODE FNC/PBC
DVD•
T V•
AUD•
DISP
1 2
ABC
3
DEF
4
GHI
7
PQRS
5
JKL
8
TUV
0
9
WXYZ
6
MNO
AUDIO ANGLE
OPEN
CLEAR ATT DIRECT
2 ZONE
VOL
FM
+
AM
−
ZOOM
RETURN
SRC
38
4
u
d
¢
¡ 1
E e
7
∞
∞
∞
∞
∞
∞
TOP MENU DVD SETUP
SUBTITLE
DVD•
T V•
AUD•
■
AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
■ DVD mode/TV mode
Not used.
NOTE
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
Ñ
Direct search mode
Using the remote control, you can jump
directly to the desired frequency value of
the Radio source by entering the number
corresponding to the content.
NOTE
• This operation cannot be performed for the USB
device and iPod.
1
Press the
[
DIRECT
]
button several times
until the desired content appears.
The available contents are different
depending on the source type.