background image

Remote control

54

Remote control

This unit can be operated using the remote 

control.

#

 CAUTION

• Put the remote control in a place where it will 

not move during braking or other operations. 
A dangerous situation could result, if the 
remote control falls down and gets wedged 
under the pedals while driving.

• Do not leave the battery near fire or under 

direct sunlight. A fire, explosion or excessive 
heat generation may result.

• Do not recharge, short, break up or heat the 

battery or place it in an open fire. Such actions 
may cause the battery to leak fluid. If spilled 
fluid comes in contact with your eyes or on 
clothing, immediately rinse with water and 
consult a physician.

• Place the battery out of reach of children. In 

the unlikely event that a child swallows the 
battery, immediately consult a physician.

Battery Installation

If the remote control operates only over 

shorter distances or does not operate at all, it 

is possible that the batteries are depleted.
In such instances, replace the both batteries 

with new ones.

Insert two “AAA”/“R03”-size batteries 

with the   and   poles aligned properly, 

following the illustration inside the case.

Functions of the Remote 

control Buttons

 

Ñ

Switch the operation mode

The functions operated from the remote 

control differ depending on the position of the 

mode switch.

V.SEL

R.VOL

MENU

ENTER

MODE FNC/PBC

DVD•

T V•

AUD•

DISP

1

2

ABC

3

DEF

4

GHI

7

PQRS

5

JKL

8

TUV

0

9

WXYZ

6

MNO

AUDIO

ANGLE

OPEN

CLEAR

ATT

DIRECT

2 ZONE

VOL

FM

+

AM

ZOOM

RETURN

SRC

38

4

u

d

¢

¡

1

E

e

7

TOP MENU

DVD SETUP

SUBTITLE

DVD•

T V•

AUD•

 

AUD mode

Switch to this mode when controlling a 
selected source or tuner source, etc.

 

DVD mode

Not used.

 

TV mode

Not used.

NOTE

•  When controlling a player that is not integrated in 

the unit, select “AUD” mode.

!B5A-2302-00b_DDX_X_En.indb   54

2019/04/26   10:41

Summary of Contents for DMX8018S









































































Reviews: