DM-SG7(EN)
29
1
Play a CD.
When a KENWOOD CD player equipped with a system control jack (DP-SG7) is connected to this unit via
a system control cord, it is possible to select and record desired CD tracks from this unit. This function
is referred to as O.T.E. (One Touch Edit). The synchronized recording with CD also possible in this
configuration.
Recording a single CD track
(O.T.E.)
Preparation
2
Start one-touch edit recording.
Simplified CD recording
¶
When the
O.T.E.
key is pressed during CD playback, the
track being played will be replayed from the beginning
and only this track will be recorded.
¶
After the track has been recorded, the MD recorder
stops and the CD player enters pause mode.
1
Stop CD playback.
Recording all tracks on a CD
(O.T.E.)
2
Start one-touch edit recording.
¶
When the
O.T.E.
key is pressed while the CD player is
in stop mode, all of the tracks of the CD will be recorded.
¶
After all of the CD tracks have been recorded, both the
MD recorder and CD player stop.
By connecting a KENWOOD CD player equipped with a system control jack (DP-SG7) to this unit via a
system control cord and starting recording with the following procedure, the recording (MD) and
playback (CD) can be started simultaneously so that there is no sound interruption.
Synchro recording with CD player
Press the
7
key to stop recording in the middle.
¶
Connect the CD player to
“OPTICAL 1”
.
$
¶
Select the CD input on the amplifier.
¶
Open the write protect tab of the Mini Disc to make it recordable.
9
¶
Load the Mini Disc.
Press the
7
key to stop recording in the middle.
Press the
7
key to stop recording in the middle.
1
Select the CD input on the amplifier.
2
Put the CD player in pause mode.
3
Select the desired CD track with the
4
or
¢
key.
4
Put the MD recorder in record-pause mode.
5
Start playback of the CD player.
O.T.E.
O.T.E.
