Kenwood DM-S500 Instruction Manual Download Page 50

Page: 50 / 52

DM-S500 (En)

Action

Meaning

Displayed Message

An attempt is made to record digital signal from
a source using other sampling frequency than
38kHz, 44.1 kHz, 48 kHz.

The optical fiber cable is unplugged or loose.
(The connector is not connected.)

An attempt is made to record digital signal from
a source while its digital copy has been prohib-
ited by SCMS.

There is no recordable area on the disc.

An attempt is made to record a 256th track.

An attempt is made to assign a title with more
characters than usable.

The disc does not contain any recordings.

The disc does not contain any tracks but has a
disc title.

The

TOC*1

data of the disc is being read.

The data related to editing or recording is being
written in the disc.

The contents of

UTOC*2

are abnormal.

An attempt is made to perform editing beyond
the restrictions, for example to erase a track
which is too short.

This is a message for confirming if editing can
really be executed.

The Mini Disc is in the

“WRITE PROTECT”

condition.

A playback-only Mini Disc is loaded.

A CD corresponding to CD-TEXT has not been
inserted into the CD player.

The CD player is not connected via an optical
fiber cable.

Title copying may not be possible, depending
on the disc.

Displayed messages and actions to be taken against them

In case of difficulty

UNLOCK

SCMS ON

DISC FULL

TITLE FULL

BLANK DISC

NO TRACKS

READING

WRITING

DISC ERROR

CAN'T EDIT

? (blinking)

PROTECTED

PLAY ONLY

CAN'T LOAD

CAN'T COPY

Use analog recording.

™

Connect the optical fiber cable correctly.

Use analog recording.

™

Use another recordable disc.

More than 255 tracks cannot be recorded per
disc.

Refer to “Total number of title characters”.

‚

When playback is required, use a recorded
disc.

The disc can be used for recording without
any problem.

This is a normal operation.

Perform

“QUICK ERASE”

to delete all titles

“

ALL?”

. If this is not possible, use another

disc.

Perform editing following the restrictions.

Press the

ENTER

key to execute editing.

Release the

“WRITE PROTECT”

condition.

Load a recordable Mini Disc.

Set a CD corresponding to CD-TEXT into the
CD player.

Connect the CD player with an optical fiber
cable and match the REC INPUT of the MD
recorder.

The titles of this disc can not be copied.
(Replace the disc.)

Summary of Contents for DM-S500





















































Search results

Summary of Contents for DM-S500

Reviews:

Related manuals for DM-S500

Brands by name

Popular brands

Kenwood DM-S500, Instruction Manual

Search results

Summary of Contents for DM-S500

Reviews:

Related manuals for DM-S500

Brands by name

Popular brands