CONNECTION/INSTALLATION
Connection
❏
Connecting Wires to Terminals for Toyota Cars
D23
D22
D21
C5
50
Page 52
Pages 51 – 52
Page 52
USB terminal:
Pages 51 – 52
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
When using the optional power amplifier,
connect to its power control terminal.
Not used.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking
sensor wire)
2
1
5
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
*
1
If no connections are made, do not let the cable come out from the tab.
*
2
When using Antenna Control, connect ANT CONT lead (blue) to A5 (blue) on the wiring harness.
Connect the antenna
cord to the antenna
terminal.
Connect to the vehicle’s steering remote
harness.
• Depending on the type of vehicle, it cannot
be connected.
6
Pin
Color and functions of Connector A, B, C and D
A1
Orange/White
Dimmer
A2
Yellow
Battery
A4
Red
Ignition (ACC)
A5
Blue
Antenna control
A6
Black
Ground connection
A8/A7
White
ª
/ White/Black
·
Left speaker (front)
A10/A9 Gray
ª
/ Gray/Black
·
Right speaker (front)
B2/B1
Green
ª
/ Green/Black
·
Left speaker (rear)
B6/B5
Purple
ª
/ Purple/Black
·
Right speaker (rear)
C5
Blue
Antenna control
D21
Light green/Red
Input 1
D22
Purple/Red
Input 2
D23
Gray/Red
Ground
Connect to vehicle’s harness.
Connect to vehicle’s harness.
Connect to vehicle’s harness.
• Depending on the type of vehicle,
it cannot be connected.
*
1
*
2
DDX̲Mid̲R̲200mm.indb 50
2014/01/29 19:00