50
ENGLISH
(USB1) 5 V
1.5 A
REVERSE
PRK SW
¥
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P.CONT
ANT.CONT
ILLUMI
MUTE
STEERING
REMOTE
ST REMOTE
GND
Input 1
Input 2
[
π
Installation and Connection
Installation and Connection
Wiring connection
10 A fuse
Connect the antenna cord to the antenna terminal.
USB1 input terminal (1 m)
Purple with white stripe
Light blue with yellow stripe
Red (Ignition wire)
Yellow (Battery wire)
Light green
To the car’s reverse lamp harness when using the optional rear view camera
To the OE remote adapter (not supplied) which is compatible with your car
To the power control terminal when using the optional power amplifier (Or)
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Not used.
Extension parking cable (
ø
)
To the car’s parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Brown
For DDX6019BT/DMX6019BT/DMX5019BT
Black (Ground wire)
Blue with white stripe (12 V
350 mA)
Orange with white stripe
Purple
]
/ Purple with black stripe
[
Green
]
/ Green with black stripe
[
Gray
]
/ Gray with black stripe
[
White
]
/ White with black stripe
[
To the car light control switch
To rear speakers /tweeter speakers* (right)
To rear speakers /tweeter speakers* (left)
To front speakers /mid range speakers* (right)
To front speakers /mid range speakers* (left)
Ignition key switch
To the car chassis
Car fuse
Car battery
Gray/Red
Bright green/Red
Purple/Red
Connect to your vehicle’s
steering remote harness.
Contact your KENWOOD
dealer for details.
* For 3-way speaker system connection, see also page 49.
00_EN_DDX719WBTL_TC_R.indb 50
00_EN_DDX719WBTL_TC_R.indb 50
5/23/2019 9:33:15 AM
5/23/2019 9:33:15 AM