58
Error message list
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
“No Signal”:
• Start the playback on the external component
connected to the AV-IN1 or iPod/AV-IN2 input
terminal.
• Check the cords and connections.
• Signal input is too weak.
“Miswiring DC Offset Error ”/“Warning DC Offset
Error ”:
• A speaker cord has shorted or it has come in to
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, then reset the unit.
(Pages 3 and 51)
“ Parking off”:
• No playback picture is shown when the parking
brake is not engaged.
“ Authorization Error”:
• Check whether the connected iPod/iPhone is
compatible with this unit. (Page 56)
“USB Device Error”:
• The USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device.
“No Navigation”:
• No navigation unit is connected.
“Connection Error”:
• The device is registered but the connection has
failed. Connect the registered device. (Page 30)
“Please Wait...”:
• The unit is preparing to use the Bluetooth
function. If the message does not disappear, turn
off and turn on the unit, then connect the device
again (or reset the unit).
“No Voice Device”:
• The connected mobile phone does not have a
voice recognition system.
“No Data”:
• No phone book data is contained in the connected
Bluetooth phone.
“Initialize Error”:
• The unit has failed to initialize the Bluetooth
module. Try the operation again.
“Dial Error”:
• Dialing has failed. Try the operation again.
“Hung Up Error”:
• The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
“Pick Up Error”:
• The unit has failed to receive a call.
“Antenna Error”:
• The antenna has a short-circuit and the protective
circuit has activated.
• Check the Digital Radio antenna. If a passive
antenna without a booster is used, set Antenna
power “OFF”.
REFERENCES
REFERENCES
DDX̲Entry̲E.indb 58
DDX̲Entry̲E.indb 58
2013/10/30 13:54
2013/10/30 13:54
