8
|
English
1
4
Video cord
Navigation system/Video monitor compatible
with the HD camera picture quality
(commercially available)
GND cord (Black)
GND
Battery
Main fuse
Fuse
Engine key
Connect to a metallic part of vehicle (a part of chassis
connected to the negative side of power supply).
CAUTION
• If the engine key of your vehicle does not have the ACC position, branch the wire energized when the engine
key is ON and connect it to the accessory power cord.
• Before proceeding to connections, make sure that the engine key is not inserted and disconnect the (
-
)
terminal of the battery to prevent the short-circuiting incident.
• Do not bend the camera cord to a diameter of 40 mm or a radius of 20 mm or less.
Accessory cord (Red)
Connect to the ON-OFF switchable power supply.
Do not connect to a permanently ON power supply.
Fuse (2A)
Camera
Connect the camera to the camera connection cord.
Connect to the rearview camera video input or to
the external video input of the video monitor.
Power cord
Power unit
Accessory power
(ACC)
Basic Connections
Camera’s cord length
:
3.0 m (9.84 feet),
Power cord
:
6.0 m (19.69 feet)*
* Including the power unit
Connections
B5A-3444-00_CMOS-740HD.indb 8
2019/12/13 17:52
