18
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode) (Mechanism-A only)
G
P
E
R
E
P
T
A
O
2
D
N
0
T
3
G
P
E
R
E
P
T
A
O
2
D
N
0
T
3
REPEAT
6
REPEAT
6
∞
DISC SKIP
5
Preparation
÷
Load discs into the carousel.
0
÷
Select the Mechanism-A or Mechanism-B.
!
Repeated playback
(REPEAT mode)
To repeat only the desired tracks (Mechanism-A only)
1
Program the desired tracks by per-
forming steps
1
to
3
of “Program-
ming tracks in desired order”.
^
÷
Up to 32 tracks can be programmed by repeating steps
1
.
2
Switch REPEAT ON.
3
Start playback.
÷
The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷
All of the programmed tracks will be repeated.
÷
If a track to be played is located in the disc played on Mechanism-B, that
track will be skipped.
÷
In case only one track is programmed, only that track will be repeated.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
To repeat one selected disc
1
Check that the Mechanism is in the
normal play TRACK mode.
#
3
Start playback.
Previous disc
Next disc
Within 8 seconds!
2
Select the disc number.
4
Switch REPEAT ON.
÷
The disc number can be selected directly by using the
DISC SELECTOR
and numeric keys in place of the
DISC SKIP
keys.
For random repetition
(
For music type repetition
§
For best selection repetition
¶
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
÷
The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷
The operation is not available during the continuous play mode.
÷
If the selected disc is being played on the other mechanism, blinking
“
DISCXXX BUSY!
“ is displayed and the disc will not be played.
Note
Note
If it is Mechanism-B that is selected, use the main unit keys for these operations.
