to use your mill
(if
supplied)
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the sealing ring
into the
blade unit
- ensuring the seal
is located correctly in the
grooved area.
G
Leaking will occur if the
seal is damaged or
incorrectly fitted.
3 Clip the blade unit
into the
base
.
4 Turn the mill blade assembly
upside down. Lower it into the
jar
, blades down. Turn in a
clockwise direction to lock.
5 Place the mill onto the power
unit.
6 Select a speed or use the pulse
control (refer to the
recommended speed chart).
7 After milling, you can replace the
blade assembly with the mill lid
.
care and cleaning
G
Always switch off, unplug and
dismantle before cleaning.
G
Empty the goblet before
unscrewing it from the blade
unit.
G
Don’t immerse the blade unit in
water.
G
The goblet can be washed in
your dishwasher.
power unit
G
Wipe with a damp cloth, then
dry.
G
Don’t immerse the power unit in
water.
G
Store excess cord in the storage
area at the back of the power
unit
.
blade assembly
1 Unscrew the blender or mill
base from the goblet/jar. Then
remove the blade unit by
pushing up from underneath.
G
Care should be taken
when removing the blade
unit from the base.
2 Remove and wash the sealing
ring.
3 Don’t touch the sharp blades –
brush them clean using hot
soapy water, then rinse
thoroughly under the tap.
Don’t
immerse the blade unit in
water.
4 Leave to dry upside down.
other parts
Wash by hand, then dry.
7
