a
pusher
b
feed tube
c
lid
d
pulp shield
e
grater plate
f
filter
g
pulp spout
h
bowl
i
juice spout
j
base
k
clip
safety
●
Never put your fingers in the feed
tube. Use the pusher supplied.
●
Fit the clip over the lid before
switching on.
●
Don’t remove the lid until the filter
has stopped.
●
Don’t touch moving parts.
●
Unplug before fitting or removing
parts or cleaning.
important
●
Don’t process more than 4.5kg
(10lb) at a time. Switch off for 10
minutes between batches.
●
If pulp stops coming out, switch off
and unclog the bowl.
●
Citrus fruits will produce bitter juice
because their pith gets processed
too. The Kenwood citrus press
(A995) is recommended for citrus
fruits.
before using for the first time:
dismantle and clean
1 Undo the clip.
2 Remove the lid.
3 Using the top of the pusher, unscrew
the grater – turn clockwise.
4 Remove the filter.
5 Remove the bowl.
6 Wash the parts: see ‘Cleaning’.
to assemble and use
your juicer
1 Slot the bowl onto the base – align
the tabs with the cut outs in the
base
1
.
2 Insert the filter – align the tabs
2
.
3 Using the top of the pusher, screw
the grater on anticlockwise
3
.
4 Fit the lid
4
.
5 Swing the clip up and click shut
5
.
6 Slide the pulp shield on
6
.
7 Remove the high speed outlet
cover
7
.
8 Attach the juicer and turn until
locked on
8
.
9 Place containers under the spouts.
preparing food
●
Remove stones (eg. plums,
peaches, cherries).
●
Remove tough skins (eg melons,
pineapples, cucumbers, potatoes).
●
Soft-skinned and other food just
needs washing (eg apples, grapes,
pears, strawberries, cabbage,
carrots, celery, lettuce, parsley,
radishes, spinach).
10 Cut the food to fit the feed tube.
11 Switch to speed 1 and push the
food down with the pusher.
cleaning
●
Dismantle before cleaning.
●
Do not wash any parts in your
dishwasher.
●
Some foods, eg carrot, will discolour
the plastic. Rubbing with a cloth
dipped in vegetable oil helps remove
discolouring.
base
Never immerse in water. Wipe with a
damp cloth, then dry.
other parts
●
Wash by hand, then dry.
●
The bottom of your feed tube has
been individually trimmed to fit
perfectly. Because of this, it’s slightly
rough – this is normal.
English
Before reading, please unfold front page showing the illustrations
2
Summary of Contents for A935
Page 1: ...A935 ...
