23
Operations
1
Use the INPUT SELECTOR knob to select the source (CD/
DVD, DVD/6ch, VIDEO2 or VIDEO3) you want to record.
2
Set the cassette deck or MD recorder to record.
3
Press and hold the DIMMER key for more than 2 seconds to
select the A-REC or M-REC mode.
1
Rec mode off :
The digital input record mode is
switched off.
2
A-REC :
The digital input signals (DTS,
Dolby Digital, or PCM) are identified
automatically and converted into
stereo signals that are ready for
recording.
3
M-REC :
The input signal type at the moment
this mode is selected is held
throughout this mode.
Recording audio (digital sources)
Switch on the
REC
mode to record a digital input source.
Usually use the
A-REC
(Auto-Record)
mode to record audio input
sources. When the digital mode changes during recording in the
A-REC
mode, the audio input source may be interrupted momentarily.
4
Start playback, then start recording.
Listening to radio broadcasts
Recording video
1
Use the INPUT SELECTOR to select the video source (other than
“VIDEO1”) you want to record.
2
Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3
Start playback, then start recording.
• Recording may not be normal for some video software. This is due to
the copy guard condition.
t
Recording music in A-REC or M-REC mode
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the
DIMMER
key.
• The mode changes every 2 seconds as shown below.
FM
AM
MHz
kHz
3
DOWN MIX
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO
PRO LOGIC
FM
AM
MHz
kHz
3
DOWN MIX
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO
PRO LOGIC
STEREO
STEREO
DIGITAL
AUTO SOUND
DIGITAL
AUTO SOUND
For M-REC mode:
FM
AM
MHz
kHz
3
DOWN MIX
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO
PRO LOGIC
PRO LOGIC
FM
FM
AM
AM
MHz
kHz
3
DOWN MIX
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO
PRO LOGIC
PRO LOGIC
STEREO
STEREO
DIGITAL
AUTO SOUND
DIGITAL
AUTO SOUND
For A-REC mode:
Tuning radio stations
The receiver can store up to 40 stations in the memory and recall them by
one-touch operation.
Recording
INPUT SELECTOR
DIMMER
RC-R0613
RC-R0720
MULTI CONTROL
INPUT SELECTOR
BAND AUTO/CINEMA EQ
MULTI
CONTROL
TUNER
AUTO
BAND
1
2
3
Each press switches the tuning method as follows:
4
Auto tuning
:
The next station is tuned automatically.
Manual tuning :
Turn the knob (press the key) to select the
desired station.
Each press switches the band
as follows:
1
AUTO lit
(auto tuning)
2
AUTO not lit
(manual tuning)
Frequency
display
“
TUNED
” is displayed when a
station is received.
• Normally, set to “
AUTO
” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
“
AM
” or “
FM
” indicator
appears in the display
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
Use the BAND key to select the desired broadcast band.
Use the AUTO/CINEMA EQ. key to select the desired
tuning method.
Use the MULTI CONTROL knob or keys to select the
station.
1
FM
2
AM
“
ST.
” lights when a broadcast
is being received in stereo.
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO SOUND
FM
MHz
STEREO
AUTO
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO SOUND
FM
MHz
STEREO
AUTO
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
MEMO
FM
MHz
STEREO
AUTO
TUNED
ST.
“
AUTO
” indicator lights up
in the display.
*5027/23-25/EN
3/15/01, 3:10 PM
23
