KFHD&KFHE Ceiling & Floor type
22
General
Information
9. Installation
10.1 Transport and handling
Caution:
Do not open or tamper with the packaging before installation. The units should only be moved and lifted by
specialized personnel trained in these operations.
Check on arrival that the unit has not been damaged during transport and that it is complete with all its parts.
To remove the packaging, please follow below instructions:
1. Check for visible damage.
2. Open the packaging.
3. Check that the manual for use and maintenance are in the packaging.
4. Dispose of the packaging material in accordance with current legislation at the appropriate waste
reception or recycling site.
The units may be moved or lifted either by hand or by means of a suitable trolley. If the weight of the unit is
more than 30kg, moving units need to be moved at the same time, it is advisable to put the machines in a
container and lift them by means of a crane or something similar.
10.2 Storage conditions
Units in packaging may be stacked not more than four-layer, and must be kept under cover.
10.3 Service spaces
Caution:
Incorrect positioning or installation of the unit may amplify noise levels and vibrations generated during
operation.
Guarantee enough clearances for installation and maintenances.
Cased type
a (mm)
150
b (mm)
20
Uncased type
≥a
≥a
≥b
≥a
≥a
