5
Auto-On:
Use this function only if you wish to
have the heater automatically turn ON after a
delayed period of time (1 to 24 hours from the
time the function is set).
Important: Ensure you position your heater
carefully as when using this function it will turn
ON automatically after the chosen time delay.
• Press the ‘MODE’ button until the ‘Timer’
( ) symbol flashes. The ‘AUTO ON’ and
‘Hour’ display will appear.
• Use the ‘+’ and ‘-‘ buttons to set the heater
operation time between 1 and 24 hours.
This function will activate once the Timer
symbol stops flashing.
• The heater will automatically turn on when
the time delay expires. Note that if the
heater does not set a specific time, it will
automatically turn off after 10 hours.
Reset
• Press the MODE button until the continuous
operation symbol ( ) appears. In this
mode the Auto-Off, Auto-On and Themostat
Functions will be cancelled.
• In this mode the heater will operate to the
thermostat maximum temperature setting
( ,
or
).
SAFETY FEATURES
Over-Heat Protection
• This heater is protected with an over-heat
protection cut-out facility that switches it off
automatically if it over-heats.
• Overheating can be caused by obstruction
to the air intakes on the back of the heater
or the grill on the front.
• If this occurs please disconnect the heater
from the power socket and allow it to cool
for 30 minutes. Remove any obstruction
and turn the heater back on.
• The heater should operate normally.
Should the problem persist contact your
nearest service centre.
Safety Cut-Out Switch
• The heater is fitted with a safety cut-out
switch to switch the heater off if it is
knocked over.
• If the heater is knocked over and the
cut-out switch activates turn the heater off
at the power outlet and take EXTREME
care when standing the heater upright as it
will still be hot.
• Inspect the heater for damage especially to
the heating elements and supply cord.
• If any damage is visible do not operate the
heater.
CLEANING AND CARE
• IMPORTANT: Turn off the heater. Switch
off the power switch and disconnect the
heater from the power socket. Wait for
the heater to be completely cool before
cleaning.
• Vacuum clean air vents and grilles to
remove dust from these areas.
• To remove dust on external surfaces, wipe
the heater with a damp (not wet) lint-
free cloth rinsed in hot soapy water only.
• Do not use any harsh detergent or abrasive
cleaners.
• Do not spray with liquids or submerge in
liquids or water.
• Do not attempt to clean the interior of the
heater.
• Do not attempt to open the heater casing
at any time.
STORAGE
• Store the heater carefully in a dust-free
area during the off season. It is ideal
to store the heater in the carton it was
supplied in. Neatly wind the cord of the
heater around the bracket provided to
prevent damage to the cord.
