4
OPERATION
• Place the heater on a flat, firm surface in a
stable upright position.
• Ensure the red power switch is in the OFF
(O) position.
• Unwind the power cord and plug your
heater into a power socket (observing the
instructions regarding positioning). Ensure
the voltage on the specification plate is the
same as in your home and the power cord
is lying safely on the ground.
• Turn the red power switch ON (I). The
heater will beep once, and the switch will
illuminate.
• Press the ( ) button to switch the heater
ON. The digital screen will display and the
heater defaults to the High Power (
)
setting. Press mode button for continuous
operation ( ).
KPE216-260 KPE216-262
No. of Fins
7
11
Low Power
600W
1000W
Medium Power
900W
1400W
High Power
1500W
2400W
• Press the ( ) button again to change to
Medium Power ( ) setting.
• Press the ( ) button again to change to
Low Power ( ) setting.
• Press the ( ) button again to turn the
heater OFF.
• Note that the heater will remain ON until it
is manually turned OFF unless you use the
Thermostat and/or Timer Function.
• To switch the heater off fully, press the ( )
button to switch the heater OFF, and then
press the power switch to OFF (O).
Thermostat Function
• Set the desired room temperature by
pressing the ‘MODE’ button until the
Temperature symbol ( ) illuminates.
• Use the ‘+’ or ‘-‘ button to set your desired
temperature.
• When the desired temperature is set the
Temperature symbol ( ) continues to be
illuminated.
• When the set room temperature is reached
the heater will turn-off and the Temperature
symbol ( ) will stop flashing.
• The heater will turn back on when the
room temperature drops below the set
temperature.
• Use the ‘+’ or ‘-‘ button to change the
desired room temperature at any time.
• The temperature setting can be set to
either
Celsius (C) or Fahrenheit (F)
by
pressing the (°C/°F) button.
24 Hour Timer Function
Note:
Always set your desired temperature
prior to setting the Timer so that the heater
turns ON at the desired temperature setting.
Once operating the heater will turn ON and
OFF as per the selected desired temperature
setting.
The Auto-Off and Auto-On functions cannot be
combined.
Auto-Off:
Use this function only if you want
the heater to automatically turn OFF after a
certain period of time (1 to 24 hours from the
time the function is set).
• Press the ‘MODE’ button until the ‘Timer’
( ) symbol flashes. The ‘AUTO OFF’ and
‘Hour’ display will appear.
• Use the ‘+’ and ‘-‘ buttons to set the heater
operation time between 1 and 24 hours.
This function will activate once the Timer
symbol stops flashing.
• The heater will automatically turn off
when the time runs out. Note that if the
heater does not set a specific time, it will
automatically turn off after 10 hours.