![background image](http://html.mh-extra.com/html/kent/kpe216-224/kpe216-224_owners-instruction-manual_1955099002.webp)
• Use this appliance only as described in this
manual.
• Any other use is not recommended by the
manufacturer and may cause fire, electric
shock or injury.
Heater Specifications
Model No.: KPE216-224
Heat Settings: 1400W / 2400W
Rating: 220-240V~, 50Hz
ASSEMBLY INSTRUCTIONS
1. Position the heater
carefully upside
down and position
the base supports
over the screw hole
in the base of each
end of the heater.
2. Secure with the 2
screws supplied
(2 screws per base
support).
3. Turn the heater the
right way up.
Positioning of the Heater
The appliance must be placed on a flat, firm
surface and should only be operated at a
minimum distance of 1 metre from any wall or
other object. For best performance, position
the heater in order to optimise the air flow of
the room.
OPERATING INSTRUCTIONS
NOTE
: When switched on for the first time a
slight odour may be emitted for a few minutes.
This is harmless and
occurs with most
appliances as slight
traces of dust or
lubricants may have
collected during
manufacture.
dropped or damaged in any manner –
in order to avoid a hazard. Return to a
qualified electrical person for service or
repair.
• Do not operate the appliance with wet hands.
• Do not connect the appliance to the mains
voltage until completely assembled and
adjusted.
• This appliance is not intended for outdoor use.
• Always operate upright, on a flat, firm surface
only.
• CAUTION: This product is NOT suitable to
be used on long pile carpets.
• Unroll the cord before operating. Operating
with a coiled cord may cause overheating
and fire risk.
• The use of an extension cord with this
appliance is not recommended.
• Do not remove the plug from the power
socket until the appliance has been
switched off.
• Always hold the plug when removing it
from the wall, do not pull the cord.
• Always unplug the appliance when it is not
in use.
• Do not allow the cord to come in to contact
with the appliance surface during operation.
• Do not run the cord under carpeting, mats
or rugs etc. Arrange the cord away from
traffic areas so that it will not be tripped over.
• Do not twist, kink or wrap the cord around
the appliance as this may cause the
insulation to weaken and split.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• This appliance is intended for light domestic
use and not for heavy duty commercial or
industrial use.
• The appliance must not be located immediately
below or in front of a socket-outlet.
• CAUTION: In order to avoid a hazard
due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
• Never remove the cover of the appliance –
in case of a fault contact a qualified
service person.
2
Thermostat Control
1400W Power
Switch
2400W Power
Switch