background image

2

•  Do not run the cord under carpeting, mats  

or rugs etc. Arrange the cord away from  

traffic areas so that it will not be tripped 

over. 

•  Do not twist, kink or wrap the cord around  

the appliance as this may cause the  

 

insulation to weaken and split. 

• This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety. 

•  Children should be supervised to ensure 

that they do not play with the appliance.

•  This appliance is intended for light 

domestic use and not for heavy duty 

commercial or industrial use.

•  The appliance must not be located 

immediately below or in front of a socket-

outlet. 

•  CAUTION: In order to avoid a hazard 

due to inadvertent resetting of the thermal 

cutout, this appliance must not be supplied 

through an external switching device, such 

as a timer, or connected to a circuit that is 

regularly switched on and off by the utility.

•  Never remove the cover of the appliance  

– in case of a fault contact a qualified    

service person. 

•  Use this appliance only as described in this  

manual. 

•  Any other use is not recommended by the   

manufacturer and may cause fire, electric 

shock or injury.

 

 

Heater Specifications

  Model No.: KPE216-147

  Heat Settings: 1200W / 2000W

  Rating: 220-240V~, 50Hz

•  Do not insert or allow foreign objects or 

metal utensils into any ventilation or exhaust 

openings as this may cause an electric 

shock, fire or damage to the appliance. 

•  Do not use this appliance in the immediate 

surroundings of a bath, a shower or a 

swimming pool.

•  Do not immerse in liquid or use the  

appliance near water as this could create   

an electrical shock hazard. 

•  If the appliance accidentally comes into  

contact with water switch off the power  

supply and do not touch the appliance.

•  Do not operate any appliance with a  

damaged cord or plug or after the  

appliance malfunctions or has been  

dropped or damaged in any manner – 

in order to avoid a hazard. Return to a 

qualified electrical person for service or 

repair. 

•  Do not operate the appliance with wet hands.
•  Do not connect the appliance to the mains  

voltage until completely assembled and    

adjusted. 

•  This appliance is not intended for outdoor use. 
•  Always operate upright, on a flat surface only.
•  CAUTION: This product is NOT suitable to  

be used on long pile carpets or rugs. 

•  Unroll the cord before operating. Operating  

with a coiled cord may cause overheating  

and fire risk.

•  The use of an extension cord with this  

 

appliance is not recommended. 

•  Do not remove the plug from the power    

socket until the appliance has been  

 

switched off. 

•  Always hold the plug when removing it    

from the wall, do not pull the cord.

•  Always unplug the appliance when it is not  

in use. 

•  Do not allow the cord to come in to contact 

with the appliance surface during operation. 

Summary of Contents for KPE216-147









Reviews: