42
The "Relief Angle" of the wheel is lower than the surface of the work, so that the work
face becomes two sections, the upper section resembling that in 3 and the lower
section in 1.
Now it is necessary to enlarge the "Relief Angle" part so that it will be higher than the face
of the work.
e. If the spindle does not constitute a right angle with the work table surface, the
machined surface will turn out to be as shown.
(7).Right Angle Grinding
a.Tools
Angle gauge
Block
Clamp
Clamp
Inclinable Magnetic Chuck
Block gauge
Clamp
b. Use of the jigs and tools: take the grinding of the block of six faces A, B, C, D, E, F.
For example:
1. Under 200mm:
*Grinding of the first basic face, or the surface grinding of A and B.
C
E
F A
B
A
B
D
Property
of
Kent
Industrial
USA
Please
Do
Not
Reproduce