41
2
1
3
(6).Common cases in Side Grinding
In the case shown in the figure above, the side-grinding wheel and the work have a smaller
contact surface, in which case the efficiency is higher, and the surface roughness is better.
In the figure above, the wheel and the work have two sections of contact, and the
surface of grinding is bad. The surface has to be corrected into the shape shown in 1.
The wheel did not cut to "Relief Angle," thus it contacts the whole face of the
work, causing the surface of processing to be rough and rugged. Also, the greater face of
contact will cause burns and cracks.
Property
of
Kent
Industrial
USA
Please
Do
Not
Reproduce