14
9097698000(1)2008-04
Razor™ Plus D24 - D28 - C28
ENGLISH
INSTRUCTIONS FOR USE
Brush/pad-holder installation/removal (for Razor™ Plus D24 - D28)
According to the kind of cleaning to be performed, the machine can be equipped either with brushes (A, Fig. 2) or pad-holders
(B) with pads (C) together with the appropriate deck.
Insert the ignition key (80) and turn it to “I” position.
Turn the speed adjuster (84) to idle by turning it counter-clockwise.
Place the brushes (A) or the pad-holders (B) under the deck (18).
Lower the deck on the brushes/pad-holders by pressing the switch (71).
To engage the brushes/pad-holders, press the drive paddle (83) and then release it. If necessary, repeat the procedure until
the brushes/pad-holders are engaged.
WARNING!
Turn the speed adjuster (84) counter-clockwise to run the machine at idle speed.
Do not press the paddle (83) completely, otherwise the machine will start moving.
A slight pressure on the paddle is enough to engage the brush/pad-holder and to turn on the relevant motor.
To remove the brushes/pad-holders, the deck must be lifted by pressing the switch (71), then press the switch (75) and wait for
the brush/pad-holder to fall on the loor.
Turn the ignition key (80) to “0”.
(*) Optional model
Figure 2
S311334
Types of brushes available
12 in (305 mm) models for Razor™ Plus D24
13 in (355 mm) models for Razor™ Plus D28
PROLENE
PROLENE
MIDLITE GRIT 180
MIDLITE GRIT 180
MIDGRIT 240
MIDGRIT 240
PROLITE
PROLITE
UNION MIX
UNION MIX
(*) Optional model
Brush/pad application guide
Models
MIDLITE GRIT 180
MIDGRIT 240
PROLENE
PROLITE
UNION MIX
General cleaning:
Concrete
Terrazzo loor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
1.
2.
3.
4.
5.
6.
7.
8.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
