SERVICE MANUAL
ENGLISH
Razor Blade 26D / 28D / 28C
909 6510 000(3)2007-12
59
DRIVE SYSTEM
DRIVE SYSTEM MOTOR, BEARING AND GASKET DISASSEMBLY/ASSEMBLY (Machines after
January 2007)
Disassembly
Drive the machine to the appointed disposal area, and empty the recovery water tank (58) with the hose (22).
Empty the solution tank (59) with the tap (36).
Place the machine on a hoisting system (if available).
Otherwise, drive the machine on a level floor.
Turn the ignition key (12) to "0".
Remove the brush/pad-holder deck (16) or the cylindrical brush deck (17) (see the procedure in the relevant paragraph).
Turn the front wheel (AG) completely to the left.
Apply proper wedges to right and left rear wheels (43), so that the machine cannot move when the front wheel (AG) is lifted.
With the help of an assistant, slightly lift the front part of the machine and apply to the frame brackets (AH) two proper wooden
shims (AI) high enough to keep the front wheel (AG) lifted for about 1.18 in (3 cm) from the floor.
Lift the tank assembly (60) and disconnect the battery connector (63).
Remove the wiring harness fastening clamp (A).
Cut the fastening clamps (B) of the connector (C).
Disconnect the electromagnetic brake connector (C).
Remove the screws (D), then remove the cover (E).
Disconnect the electrical connections (F).
F
D
E
C
A
B
B
S301643
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Summary of Contents for 908 7099 020
Page 2: ......
