![background image](http://html.mh-extra.com/html/kensington/pocketmouse-pro-wireless/pocketmouse-pro-wireless_user-manual_664370003.webp)
Wireless Installation
To establish a wireless connection:
Push the button on the receiver (1). The LED on the receiver will
turn green.
Next push and hold down connection button on the mouse (2) for 2-5 seconds.
When the light on the USB receiver turns off, try using the mouse. If this does
not work, try repeating these steps, but hold the mouse closer to the USB
receiver. This step may need to be repeated 2–3 times for the mouse
to synchronize.
When you replace the batteries, repeat these steps.
Battery Installation
1. Use a coin to unlock the screw on the bottom of the mouse.
2. The cover will pop open slightly as it unlocks.
3. With extra firm grip, pull the cover upward.
4. Install the included AAA batteries.
LED on the receiver will glow orange when batteries are low.
4 • PocketMouse Pro Wireless
PocketMouse Pro Wireless • 5
1
2
1
3 feet
max.
2
3
4
72117_PMProWless 5/7/04 5:31 PM Page 4