8
9
2
3
Unlocking Your KeyFolio
1
2
3
180°
Charge the Battery
Charge your KeyFolio before initial use or when the
Charging Indicator
blinks green.
1
Insert the small end of the
Charging Cable
into the
micro USB Charging Connector
on
the Keyboard.
2
Insert the other end of the
Charging Cable
into your iPad charger.
3
Plug your iPad charger into a working outlet. The
Charging Indicator Light
glows red.
4
When the Keyboard is fully charged, the
Charging Indicator Light
turns off.
Troubleshooting
I can’t connect the Keyboard to my iPad.
Try the following in sequence. You can stop when the problem is fixed.
1
Make sure you have installed and set up Bluetooth correctly on your iPad. Check the
documentation that came with your iPad for instructions.
2
Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range is
about 10 meters/33 feet.
3
If your iPad is connected to other Bluetooth devices, you may need to disconnect some
devices before you can connect to the Keyboard.
4
If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to
your iPad again.
5
Make sure that both your iPad battery and the Keyboard battery are sufficiently
charged.
If this does not solve the problem, please contact Kensington Support at
kensington.com
.
Technical Support
Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
