1.
Place
the
kettle
on
a
flat,
stable
surface.
2.
To
fill
the
kettle,
remove
it
from
the
power
base
and
open
the
lid
by
pressing
down
lid
release
button,
then
fill
the
kettle
with
the
desired
amount
of
water
and
close
the
lid.
The
water
level
must
be
within
the
Min
and
the
Max
level.
Too
little
water
will
cause
the
kettle
to
switch
off
before
the
water
has
boiled.
NOTE:
Do
not
fill
the
water
over
the
maximum
level,
as
water
may
spill
out
of
the
spout
when
boiling.
Ensure
that
the
lid
is
firmly
in
place
before
operating.
3.
Position
the
kettle
on
the
power
base.
4.
Connect
the
plug
into
a
power
outlet.
Press
down
the
power
switch
and
the
indicator
will
light
up,
the
kettle
will
then
start
to
boil
the
water.
The
kettle
will
switch
off
automatically
once
the
water
has
boiled.
If
re-boil
is
required,
you
will
need
to
wait
approximately
30
seconds
before
pressing
the
switch
again.
You
may
shut
off
the
power
by
lifting
the
power
switch
up
or
directly
lift
the
kettle
from
the
power
base
at
any
moment
to
stop
boiling
process.
NOTE:
Ensure
that
switch
is
free
of
obstructions
and
the
lid
is
firmly
closed,
the
kettle
will
not
automatically
turn
off
if
the
switch
is
constrained
or
if
the
lid
is
open.
5.
Lift
the
kettle
from
the
power
base
and
then
pour
the
water.
NOTE
:
Take
care
when
pouring
the
water
from
your
kettle
as
boiling
water
may
result
in
scalding,
Do
not
open
the
lid
while
pouring.
6.
To
re-boil,
press
the
switch
again.
The
kettle
may
be
stored
on
the
power
base
when
not
in
use.
5
HOW TO USE
