![background image](http://html1.mh-extra.com/html/kensington/bungeeair-protect/bungeeair-protect_quick-start-manual_664076019.webp)
18
The iPhone 4 doesn’t lock right away when the fob and adaptor are separated
The adaptor will not lock the iPhone until after the first 10 seconds of the alarm have
elapsed and the fob and adaptor remain out of range. This provides the opportunity
to get the adaptor and fob back into range.
My phone call terminates when the iPhone 4 locks
This is the expected experience when the iPhone 4 locks. BungeeAir provides a 10
second reminder before locking the iPhone 4 so that the adaptor and fob can be
brought back into range and not interrupt their iPhone experience.
The BungeeAir app says the BungeeAir is “initializing”
Check that the fob batteries are installed correctly, that the fob and adaptor are in
range of each other, and that the fob is in the “On” position.
BungeeAir is briefly going in and out of range
Being a radio product, the performance will be affected by different environments
(i.e. on a desk, in a pocket, near metal, etc.). Try using the “Long” range setting. If the
condition persists, consider relocating the fob and/or adaptor to change the
environment. If the condition persists when BungeeAir is completely unobstructed,
check the batteries on the fob.
General Information
Alarm modes
Alarm Mode
Stage 1
Warning Period
Stage 2
Full Alarm
Comments
Range Exceeded
when Armed
Slow beep
& vibration
sequence for 10
seconds
Rapid beep
& vibration
sequence for 2
minutes
Occurs only when armed
Can be turned off in Stage 1 by coming
back in to range
Can be muted at any time using the
mute button
Stage 2 causes the iPhone screen to lock
Find My Fob
Rapid beep
& vibration
sequence for 15
seconds
N/A
Functional when either Armed or
Disarmed
Beeps & vibrates when in range
Can be muted at any time using the
mute button
Does not cause the iPhone screen to
lock
“Play” function initiates the music for
15 seconds