Care and Cleaning
□
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
□
Wash the shade with a soft brush and mild detergent (such as dishwashing soap) and then thoroughly
rinsed.
Troubleshooting
Possible Cause
□
The bulb is burned out.
□
The power is off.
□
The circuit breaker is off.
□
There is an exposed wire.
□
There are too many items on
one circuit.
□
Discontinue use of the lamp.
□
Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
□
Unplug other items on the circuit.
□
Ensure that the circuit breaker
is set in the on position.
□
Ensure that the power supply
is turned on.
□
Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
□
Did not insert plug into power
outlet.
□
Ensure that the plug is fully and
properly inserted into the power
outlet.
Important safety instructions
□
Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding
receptacles that accept the appliance's plug.
□
Ground fault circuit interrupter (GFCI) protection is to be provided on the circuit or outlet to be used for
the wet location portable luminaire. receptacles are available having built-in gfci protection and are able to be
used for this measure for this measure or safety.
□
use only with an extension cord for outdoor use. such as an extension cord of cord type sw, sw-a. sow,
sow-a, stw, stw-a, stow, stow-a, sjw, sjw-a, sjow, sjow-a, sjtw, sjtw-a, or sjtow, sjtow-a.
Bulb Replacement
□
Before replacing the bulb, be sure that the glass shade and bulb are cool and lamp is unplugged.
□
Disassemble the lantern to expose the bulb, remove the existing bulb from socket, replace with a new bulb,
then reassemble the lantern, plug power supply cord back into outlet.
7
