background image

• 

 Splashing may occur when the fountain is first turned

    on, protect surrounding surfaces as needed.  

    Do not place the water feature on or near 

    any surface that can be damaged by water.

•  To reduce the risk of electrical shock, always disconnect 

    the power supply before working with the water feature.

•  Keep small children and pets away from the water 

    feature; they can fall into the water feature and drown.

•  Once a week inspect water feature, floor and adjacent 

    wall for moisture build-up and clean as necessary. This is 

    especially important for humid environments.

•  This water feature is designed for outdoor use. It can be used indoors, 

    however splashing may occur.

More information about water features can be found at 

youtube.com/kenroyhomefountains.

51109IV ASSEMBLY INSTRUCTIONS

WATER FEATURE WARNINGS & 

TROUBLESHOOTING

• 

 Distilled water is recommended to reduce mineral

    deposits, bacteria build up and algae that may damage

    the water feature basin and pump.

 

If abnormal noise is heard during operation (with water):

•  Disconnect the power supply and then remove the pump front 

    cover  and impeller cover.

•  Use hand to grip the impeller, gently pull the impeller/rotor 

    assembly out of the pump housing. 

•  Rinse the impeller/rotor assembly and the cavity with clean water. 

    If breakage or surface damage is found in the assembly contact 

    Customer Service for a part replacement. 

PUMP SAFETY & TROUBLESHOOTING cont.

Summary of Contents for 51109IV













Reviews: