KEYPAD LOCK -
To prevent unauthorized use of the thermostat,
the front panel buttons may be disabled. To disable, or ‘lock’ the
keypad, press and hold the MODE button. While holding the
MODE button, press the UP and DOWN buttons together. The
icon will appear on the display.
To
unlock
the keypad, press and hold the MODE button.
While holding the MODE button, press the UP and DOWN
buttons together. The icon will disappear from the display.
I2 00
70
:
M
ProgramOn
Night
Am
MODE
About Advanced Features & Operation
Page 24
HUMIDIFICATION/DEHUMIDIFICATION SETPOINTS - When
adjusting the humidification and dehumidification setpoints,
the thermostat will not
etpoint to
get closer to the h
etpoint than 5%
.
For
example: If the humidification setpoint was set to 35%, then
the dehumidification setpoint would not be able to be set
any lower than 40%. Additionally, if the dehumidification
setpoint was set to 25%, then the humidification setpoint
would not be able to be set any higher than 20%.
NOTE: The HUM terminal will be energized any time that
there is a call for Humidity. For the operation of the
DEHUM terminal see pages 8 and 18-20.
allow the dehumidification s
umidification s
MEMORY BACKUP - In the event of a power loss, the TSTAT-
0713K will retain the stored program settings without external
power or batteries.
62
o
o
82
HEAT
COOL
Press all three
buttons in the order
outlined above for
keypad lockout
