- 13 -
CLEANING WITH THE HAND VACUUM
Easily clean messes on furniture, upholstery,
stairs, and other hard-to-reach areas with one
of the four included accessory tools.
1. To detach the hand vacuum, press the release
button and pull the hand vacuum from the
wand.
2. Insert the accessory tool into the end of the
hand vacuum until you hear a click.
3. When finished cleaning, turn power OFF and
press release button to remove tool.
Release Button
There is an LED dirt sensor located on the
motorized carpet nozzle. When the carpet
nozzle is in use, a blue light on the top of
the nozzle will illuminate to show that dirt is
being vacuumed. As long as the light is on,
dirt is passing across the sensor to indicate
that the surface still requires cleaning.
When the sensor light turns off, the sensor
is not seeing enough dirt to warrant further
cleaning of that area.
To turn the vacuum off, slide the power
switch down to the bottom.
NOTE:
When battery power decreases
to about 10% remaining, the last bar
of the battery level indicator will start
flashing. The flashing will continue until the
unit is placed on the charging dock or is
completely out of battery power.
Dirt Sensor
Indicator Light
VACUUM OPERATION
