2.
Carefully remove any debris or blockage
from inside of the hose. Reattach the nozzle
onto the telescoping wand.
3.
Once the blockage is removed, start the
vacuum to ensure air flow through the hose.
CAUTION!
Do not use scissors or other
sharp objects to remove a blockage from the
hose.
5. Lock the brush roll
in place by rotating
the metal ring from
the unlocked symbol
position to the locked
position.
Release Button
- 15 -
VACUUM MAINTENANCE AND CARE
4. Align the brush roll to the brush drive
and slide the brush roll into the housing.
You may need to rotate the roll slowly
to make sure the roll matches the drive
gear, then the roll can be completely
inserted. Rotate the brush to ensure it
turns easily before turning vacuum ON.
6.
Place the metal ring in the slot.
Brush Roll Reset
If the brush roll is blocked or overloaded,
the unit will automatically stop power.
Switch the unit to the OFF position and
remove the obstruction.
Nozzle
Hose Blockage Removal
1. To clean out the hose, press the release
button on the telescoping wand, and
pull the motorized nozzle away from the
telescoping wand.
1. Ensure the vacuum is OFF.
2. Turn unit to the side to access the brush
roll. To unlock brush roll, grab metal
ring and rotate to the unlocked symbol
position. With nozzle facing down, pull
out the brush roll from the housing.
3. Clean off debris and anything wrapped
around the brush. Use a screwdriver
wrapped with a clean cloth to clean the
left and right surface of the inner air-
path. Pay special attention to the EASY-
CUT blade to avoid injury.
EASY-CUT BLADE
The carpet nozzle
roll may accumulate
debris such as strings,
hair and fibers.
This type of debris
can wrap around the
brush and diminish
its ability to clean effectively. The Easy-Cut
blade in the carpet nozzle will cut most debris
accumulation away from the brush roll.
After every use, clean the carpet brush roll
with the Easy-Cut system by stepping on the
button for 15 seconds as illustrated while the
brush roll is spinning.
Brush Roll Manual Cleaning
WARNING!
The carpet nozzle contains an EASY-CUT
blade. It has an extremely sharp edge inside.
Do not touch the blade when performing
carpet nozzle maintenance.
Summary of Contents for SSV Complete 125.10441710
Page 32: ... ...
