10
Insert sideburner burner into left shelf.
shelf, shown A.
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Secure burner to sideburner drip pan with one Wing nut, shown B.Make sure burner tube engages
sideburner valve, shown C.
B
A
Sideburner burner
Sideburner drip pan
Sideburner drip pan
Burner tube
Valve
C
Wing nut
Wing nut
Qty.1
464222209 • 21
9
First, remove the two screws and lock washers already attached to the sideburner valve bracket.
Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8” screws and 4mm lock washers. Press sideburner control knob onto valve stem.
Screws and Washers
removed from valve bracket
Note: Use upper and lower
holes on fascia to
attach bezel
Sideburner
valve bracket
Valve stem
Screw
Lock washer
Control knob bezel
#8-32x3/8” screw
#8-32x3/8” screw
Qty.2
Qty.2
4mm
4mm lock washer
lock washer
Valve stem
Sideburner
shelf fascia
Sideburner control knob
