background image

Use

 

and

 

Care

 

Guide

 

 

Liquid Propane Gas Grill with Infrared Cooking System

Sears

 

Model

 

No

415.16650900

 

This

 

Grill

 

is

 

for

 

Outdoor

 

Use

 

Only

 

 
 
 
 
 

 

464222209 • 80019045 • 11-18-08

©2008 Sears, Roebuck and Co., All Rights Reserved

Printed in China

SAVE

 

THESE

 

INSTRUCTIONS

 

Safety

 

 

Parts

 

 

Use

 

and

 

Care

 

 

Assembly

 

Assembly

 

Questions

?  

Call 1-800-241-7548
Tools

 

needed

 

for

 

assembly

Adjustable

 

wrench

 (

not

 

provided

Screwdriver

 (

not

 

provided

7/16" 

Combination

 

wrench

 (

not

 

provided

 

Read

 

and

 

follow

 

all

 

Safety

Assembly

,  

and

 

Use

 

and

 

Care

 

Instructions

 

in

 

this

 

Guide

 

before

 

assembling

 

and

 

cooking

  

with

 

this

 

grill

 

Failure

 

to

 

follow

 

all instructions

 

in

 

this

  

Use

 

and

 

Care

 

Guide

 

may

 

lead

 

to

 

fire

 

or

 

explosion

which

 

could

 

result

 

in

 

property

 

damage

personal

 

injury

 

or

 

death

Sears, Roebuck and Co., Hoffman Estates, IL  60179  U.S.A.

WARNING

Summary of Contents for Sears 415.16650900

































Reviews: