28
Drip Tray, Drip Cup and LP Tank
Slide drip tray into bottom of firebox from back.
Hang drip cup clip from bottom of drip tray. Make sure the drip drainage hole is on the right side, as
seen from the back of the grill. Place drip cup into drip cup clip.
Insert the tank sensor to the holes on the bottom shelf, rotate it until it locks.
LP tank is sold separately. Use only with an OPD (Overfill Protection Device) equipped LP tank. Fill and
leak check before attaching to grill and regulator. Place LP tank into the tank sensor with tank collar
opening facing to the right as shown. Feed the regulator and hose through the hole in the right side
panel. Raise tank holder to hold LP tank securely in place.
Always lock caster brakes when grill is in desired cooking location to help grill stay in place for stable
operation.
9
Failure to install drip cup clip and drip cup
will cause hot drip to drip from bottom of
grill with risk of fire and property damage.
CAUTION
CAUTION
Failure to install tank correctly may allow
gas hose to be damaged in operation.
Summary of Contents for PG-40409S0LB-BKSG
