26
Setting Oven Controls
Meat Probe
(cont’d)
Fig. 1
Fig. 2
See the following instructions for changing how the oven
reacts after reaching the internal target temperature.
† The U.S. Department of Agriculture states, “Rare fresh
beef is popular, but you should know that cooking it to
only 140ºF/60ºC means some food poisoning organisms
may survive.” (Source: Safe Food Book, Your Kitchen
Guide, USDA Rev. June 1958.)
The lowest temperature recommended by the USDA is
145ºF/63ºC for medium rare fresh beef.
To set the oven to continue cooking after reaching the
probe target temperature:
1. Press
MEAT PROBE
keypad and hold for 3 seconds.
2. Press
SELF CLEAN
keypad and toggle until the “Continu”
message appears (Fig. 1) then press
START
to accept.
To set the oven to cancel cooking and automatically start
Warm & Hold after reaching the probe target temperature:
1. Press
MEAT PROBE
keypad and hold for 3 seconds.
2. Press
SELF CLEAN
keypad and toggle until the “CAnCEL”
message appears (Fig. 2) then press
START
to accept.
To Set Meat Probe:
5. Set the oven control for Bake, Conv Bake or Conv Roast
and the desired oven temperature. You may use the
meat probe with some other baking features, but the
meat probe cannot be set with Broil or Self Clean.
6. To set the target temperature press
MEAT PROBE
keypad once then enter the desired target internal
temperature using the numeric key pads (default setting
is 170ºF/77ºC)†. Press
START
to accept the meat probe
target temperature. Close the oven door.
7. During the cooking process the actual meat probe
temperature will display by default. To view the target
temperature press the Meat Probe keypad once. After
25 seconds the display will show the actual meat probe
temperature. If the target temperature needs to be
changed during the cooking process, press the Meat
Probe keypad once and use the numeric keypads to
adjust the target temperature. Press the
START
key to
accept any change.
8. The oven control will provide 3 beeps when the internal
target temperature is reached. By default the oven
will automatically change to a Warm & Hold setting.
The Warm & Hold function will maintain the oven
temperature at 170°F (77°C). Instructions for changing
how the oven reacts after reaching the internal target
temperature may be found later in this section. Press
STOP
to cancel cooking at any time.
