7
ENGLISH
Installing Your Refrigerator
How to Install and Remove Handles
1
Remove top handle trim by
removing top handle screw.
Retain trim and screw for later
replacement.
Removing Refrigerator Front-Mounted Handles
Removing handles may be necessary when transporting unit
through tight spaces, or when reversing the door.
Installing Refrigerator Front-Mounted Handles
If installing handles for the first time, the refrigerator handles
can be located within the refrigerator section. The handle trim
will be located in the literature pack.
1
Remove ¼" hex nut screws
from door face with hex nut
driver.
If reversing door, remove door
plugs from opposite side of door
and insert
Align handle holes with screw
holes on door face and secure
with 2 door face screws from
step 1.
2
3
Locate handle trim in literature
pack and install over top and
bottom of handle, as illustrated.
Secure top handle trim with remaining
screw removed in step 1.
Snap bottom trim over bottom portion of
handle.
2
Pry bottom handle trim from
handle with screwdriver flat blade
wrapped in masking tape.
Retain trim for later replacement.
3
Remove two remaining
handle screws and
remove handle.
Retain screws for later
replacement.
Installing Freezer Handles
If installing handles for the first time, the freezer handles can
be located within the freezer section.
Install handle by fastening with
screws removed from edge of
door.
If reversing freezer door, remove
door plugs from top edge of door
and insert into screw holes.
Removing Freezer Handles
Removing handles may be necessary when transporting
unit through tight spaces, or when reversing the door.
Remove handle screws with
Phillips screwdriver.
Retain screws for later replacement.
Removing Refrigerator Side-Mounted Handles
Removing handles may be necessary when transporting
unit through tight spaces, or when reversing the door.
Installing Refrigerator Side-Mounted Handles
If installing handles for the first time, the refrigerator
handles can be located on the back of the refrigerator.
Install handle by fastening
with screws (T-15 Torx
®*
)
removed from edge of door.
Remove handle by removing
three screws (T-15 Torx
®*
) from
side of door.
Retain screws for later replacement.
If reversing freezer door, remove door
plugs from top edge of door and insert
into screw holes.
Installing Freezer Handles
If installing handles for the first time, the freezer handles
can be located on the back of the refrigerator.
Remove handle by removing
three screws (T-15 Torx
®*
) from
handle.
Retain screws for later replacement.
Install handle by fastening with
screws (T-15 Torx
®*
) removed
from edge of door.
Removing Freezer Handles
Removing handles may be necessary when transporting
unit through tight spaces.
* Torx
®
is a registered trademark of Textron Inc.
