10
Setting the Simmer / Regular / Power Burners
Setting Surface Burner Controls
Operating the Regular Burner:
1. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn
counterclockwise
out of the
OFF position (See Figure 1).
3. Release the knob and rotate to the LITE position.
Note: All four (or five) electronic surface ignitors will spark at the same
time. However, only the burner you are turning on will ignite.
4.
visually check that the burner has a flame.
5. Once the burner is lit, continue to turn
counterclockwise
to the desired
flame size. The control knobs do not have
to be set at a particular setting. Use the
knob indicator settings to adjust the flame
as needed.
DO NOT
cook with the surface
control knob in the LITE position (The
electronic ignitor will continue to spark if
the knob is left in the LITE position).
Figure 1 - Regular Burner
OFF
MED
LO
HI
LITE
Turn
Counterclockw
ise
