Kenmore Elite 795.71082.01 series, Service Manual

Page: 29 / 56

8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM
8-1 FUNCTION
8-1-1 Function
1. When the appliance is plugged in, it is set to 37°F for Refrigerator and 0°F for freezer.
You can adjust the Refrigerator and the Freezer control temperature by pressing the ADJUST button.
2. When the power is initially applied or restored after a power failure, it is set to Control temperature Previously.
8-1-2 How to Toggle the Display between °F & °C
1. The initial setting is °F and the display temperature mode can be changed from °F to °C or °C to °F by pressing and
holding the FRZ TEMP and the REF TEMP keys at the same time for over 5 seconds.
8-1-4 Filter condition display function
1. There is a replacement indicator light for the filter
cartridge on the dispenser.
2. Water filter needs replacement once six months or of
using water filter.
3. Water Filter icon turn on to tell you need to replace the
filter soon.
4. After replacing the filter, press and hold the lock button
more than 3 seconds.
Water Filter icon turn off with reset status.
8-1-3 Lock function (dispenser and display button lock)
1. When the refrigerator is first turned on, the buttons are not locked.
The display panel shows the padlock unlocked icon.
2. To lock the display, the dispenser, and the control panel, press and
hold the LOCK button for 3 seconds. The locked pad lock icon is
displayed.
3. The LOCK button is the only control feature that remains active in the
locked state. The buzzer sound, other control buttons, and the
dispenser are deactivated.
4. To release from the locked state, press and hold the LOCK button
again for 3 seconds.
In initial Power On
/ Filter RESET
Replace indicator
light on
Filter Status
Display
Classification
Ex) In selecting
"LOCK"
Press & Hold Press & Hold
Ex) In selecting
"LOCK" again
Press & Hold Press & Hold
- 29 -