Kenmore Elite 795.71082.01 series, Service Manual

Page: 22 / 56

- 22 -
6-2 OTHER ELECTRICAL COMPONENTS
Not cooling at all
Poor cooling performance
Compressor
doesn't run.
Compressor runs
poorly.
Fan motor doesn't
run.
Heavy frost buildup on
EVAPORATOR.
Check starting
voltage.
Check voltage at
starting devices.
Check wiring circuit.
Check Fan Motor.
Check current flow in
the following
components :
Sensor
Fuse-M
Check current flow in
the Defrost Heater.
Check current flowing
in sub-coil of
Compressor.
Check rating of OLP.
Low voltage.
Poor or broken or
open contact.
Shorted.
Lack of capacity.
Wire is open or
shorted.
Coil is shorted or
open.
Replace
indicated component.
Replace
indicated component.
Replace
Defrost Heater.
Open.
Open.
Check for open short or
incorrect resistance readings
in the following components
a. Starting devices
b. OLP
c. Compressor coil
d. Wiring harness
Short, open, or broken.
Poor contact or
shorted.
Coil open or shorted.
Poor contact or
shorted.
Cause
Replace indicated
component.
Advise customer that
the Power supply
needs to be checked
by an electrician.
Replace
indicated component.