Kenmore Elite 116.31150, Use & Care Manual

Page: 15 / 48

- 15 -
VACUUM CLEANER STORAGE
TO CLEAN DIRT SENSOR OPTICS
Replace hose and wand in storage position
if necessary
(see Page 6 & 7).
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord.
Store the vacuum cleaner in a dry, indoor
area, on the floor with the handle locked in
the upright position.
WARNING
Electrical Shock And Personal Injury Hazard
Wrapping the cord too tightly puts stress on
the cord and can cause cord damage. A
damaged cord is an electrical shock hazard
and could cause personal injury or damage.
Clean Out
Port
Dirt Sensor
Optics
The dirt sensor optics consist of two optic
cells located inside the clean out port.
Occasionally, it may become necessary
to clean the two optic cells to ensure
maximum performance. It is recommended the optic cells be
cleaned:
• When the light stays on continuously.
• When dirt or dust adheres to the
optic
cells.
• Whenever the dust bag is removed.
To clean the sensor, wipe the optic cells
with a soft, dry cloth. Never use cleaners
or liquids as they can help speed the
recoating of the optic cells and make it
necessary to clean them much sooner
than normal.
Reinstall cover. Make sure it is completely
secured in place.